Handicare 1100 Stairlift repair

Simple Access Mobility in New Jersey fix Handicare 1100 or repair stair lift Handicare 1100.

These are some common problems that Handicare 1100 stair lift has.

 Why does my Handicare 1100 keep beeping? 

 One of the most common reasons for a beeping stairlift is a low battery. If your stairlift batteries have died, your device might beep to let you know that they need changing. Stairlifts require sufficient power to be able to operate smoothly and safely.

 How do you reset the Handicare 1100 stairlift?
 

1. Turn the stairlift off at the plug.
2. Then turn the on / off switch – this is located on the bottom of the stairlift under the cover to 'Off' (you need to remove the cover).
3. Wait 30 seconds.
4. Turn on the on / off switch again to 'On' and replace the cover. Switch back on at the plug. handicare 1100 stairlift repair

  Why is my Handicare 1100 stairlift battery not charging? 

 Still, the stairlift itself is not currently charging, which could be due to a faulty connection between the charger and the battery, or the charging contacts on the stairlift might be dirty or misaligned; check the wires connecting the charger to the stairlift for damage or loose connections. handicare 1100 battery replace

 How do I stop my stairlift from beeping?

If the chair is located at the bottom of the stairs and is beeping, it may be that it has not come fully down to the bottom of the rail and is not sat on its charging point. To fix this, simply press the down button on the wall control to allow the stairlift to finish its travel

 Why is my stairlift beeping and won't move?

If your stairlift is beeping continuously when not in use, it usually means it is not charging the internal batteries. The most common reasons are: The stairlift is not parked on a charge point (if it has one) It is turned off at the wall (perhaps accidentally, e.g. by a cleaner) 

 Here are some things you can try if you're having trouble with your Handicare 1100 stairlift:

• Check the power switch: Make sure the main power switch on the lift is turned on. 
• Check the arms: If the lift doesn't drive, make sure the arms are down. 
• Check for obstructions: Make sure nothing is blocking the safety sensors or pressure switches. 
• Check the seat: Ensure the seat is swiveled and locked into place.  
• Reset the stairlift: Turn off the stairlift at the plug, then turn the on/off switch to "Off". Wait 30 seconds, then turn the switch back to "On" and replace the cover. 
• Check for error codes: If you're seeing an error code, you can call the installer. For example, code "o" means there's a fault with the main printed circuit board, and code "y" means the control system has detected a hardware fault. 

If you need Handicare 1100 repair in New Jersey, call us at 856-313-2075